Acer PD726 - Page 26

Chapter2 20
No Step Procedure Photo
10 Check
the whole
process
1. In the “Read Item”
Selections, choose
the Port that you use.
Ex: If you use the
Analog Port, choose
“Analog” in the “Read
Item”.
2. Click on “Read” to
read EDID
information.
3. The “EDID
Informations” will
show the result.
(Note: After press-
ing “Read”, if the code
in the Serial Blank is
scrambled, please make
a check in “Trans”.)
4. Click “Reset” to do the
next unit or “Exit” to
close the EDID
program.
PS.
Both Analog and Digi-
tal are needed to be
checked.
Note
1
2
3
4