Acer PD726 - Page 25

19 Chapter 2
No Step Procedure Photo
7 Install
HDMI
EDID
For the HDMI EDID
Installation:
1. Plug “DVI-HDMI
Connector” in the
HDMI port.
2. Connect the DVI
Cable.
3. Once the Cable is
connected, please
follow the step 3 and
choose the Digital
pattern to execute the
EDID installation.
8 Change
Cable to
Digital
“Please change the
Cable to Digital” mes-
sage is shown on the
screen, then click “OK”.
(Note: “RUN” mes-
sage will appear on the
screen.)
9 Finished
When the EDID program
is completed, the mes-
sage, “OK”, will appear
on the screen.
1
2
3