Lamp Reminding
Choose this function to show or to hide warning message when the
changing lamp message is displayed. The message will show up 30
hours before end of life.
Security
Press to start “Security” setting. If the “Security” function is
enabled,yourmustenter“AdministratorPassword”firstbefore
Security setting.
Security
This projector provides an excellent security function
for the administrator to manage the usage of the
projector.
Select “On” to enable the security function. User
have to enter password depending on the " Security
Mode" . Please refer to "User Password" section for
details.
Select “Off” then user can switch on the projector
without password.
Oncethesecurityfunctionisenabled,theprojector
will request user to enter password when switch on
the projector or enter security setting. Both “User
Password” and “Administrator Password” can be
accepted for this dialogue.
Management
(Computer / Video
Mode)
To Next Page
Loading...
Need help?
General
