Acer PL1620n - Page 49

English
49
USING THE PROJECTOR
5. Click “Properties”.
6. Type in the IP address and Subnet mask, then press “OK”.
7. Press the “Menu” button on the projector.
8. Open on projector Network > LAN.
9. Enter the following connection parameters:
– DHCP: O󰀨
– IP Address: 192.168.0.100
– Subnet Mask: 255.255.255.0
– Gateway: 192.168.0.254
– DNS: 192.168.0.51
10. Press “Enter” to conrm settings.
11. Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher
installed.
12. In the Address bar, input the projector’s IP address: 192.168.0.100.
13. Press “Enter”. (The default user name and password is “admin”.)