To Next PageTo Next Page
Need help?Do you have a question about the Acer PL6510 and is the answer not in the manual?
General| Native aspect ratio | 16:9 |
|---|---|
| Projection distance | 1 - 9.3 m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 2000000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | 1080p (1920x1080) |
| Vertical synchronization (max) | 0.12 kHz |
| Vertical synchronization (min) | 0.024 kHz |
| Keystone correction, horizontal | -30 - 30 ° |
| Horizontal synchronization (max) | 100 kHz |
| Horizontal synchronization (min) | 15 kHz |
| Lamps quantity | 1 lamp(s) |
| Light source type | Laser |
| Service life of light source | 20000 h |
| Service life of light source (economic mode) | 30000 h |
| Placement | Ceiling |
| Product type | Ceiling-mounted projector |
| Product color | White |
| LED indicators | Yes |
| Market positioning | - |
| Cable lock slot type | Kensington |
| Throw ratio | 1.4 - 2.24 |
| Focal length range | 20.91 - 32.62 mm |
| Supported video modes | 1080p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA) |
| DVI port | No |
| Composite video in | 1 |
| Serial interface type | RJ-45 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | - dB |
| Projection modes | Ceiling, Front, Rear |
| Compatible operating systems | Mac PC Windows PC |
| RMS rated power | 20 W |
| Power source | AC |
| AC input voltage | 100 - 230 V |
| Power consumption (standby) | - W |
| Power consumption (typical) | 321 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
| Harmonized System (HS) code | 85286200 |
Weight and Dimensions| Weight | 6000 g |
|---|
Safety precautions and guidelines for operating the projector using electrical power.
Identifies and labels the physical parts of the projector.
Details the projector's input and output ports and their functions.
Describes the buttons and functionality of the projector's remote control.
Provides guidelines for physically mounting the projector in various positions.
Details important notices and restrictions regarding projector installation orientation and spacing.
Illustrates how to connect various external devices to the projector.
Explains how to adjust image height, zoom, lens shift, and focus.
Step-by-step instructions for turning the projector on and off correctly.
How to choose the active input signal for display on the screen.
Explains how to navigate the on-screen display (OSD) menus and adjust settings.
Covers image adjustments like mode, color, brightness, contrast, aspect ratio, and 3D.
Covers settings for audio mute, volume control, and input source selection.
Outlines various setup options including projection, screen type, power, security, HDMI Link, HDBaseT, and general options.
Offers solutions for common image and operational problems encountered with the projector.
