Why does my Acer P6500 have no image onscreen?
First, ensure the projector is connected as described in the Getting Started section and that none of the connector pins are bent or broken. Next, check if the projector lamp has been securely installed. Also, verify that you have removed the lens cap and the projector is switched on.
What to do if Acer P6500 image is too small or too large?
Adjust the zoom lever on the top of the projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote control, go to "Image - -> Aspect Ratio" and try different settings, or press "RATIO" on the remote control to adjust directly.
What to do if Acer P6500 Projector stops responding to all controls?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
What to do if the screen of the notebook computer is not displaying your presentation on Acer P6500 Projector?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
What to do if the Acer Projector image is out of focus?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, make sure the projection screen is within the required distance of 3.3 to 28.1 feet (1.0 to 8.6 meters) (XGA series) / 3.3 to 30.7 feet (1.0 to 9.4 meters) (1080p series) / 3.3 to 29.9 feet (1.0 to 9.1 meters) (WUXGA series) from the projector.
How to fix slanted sides on Acer Projector image?
If possible, reposition the projector so that it is centered on the screen. Alternatively, press the “Keystone / “ button on the remote control until the sides are vertical.
How to correct unstable or flickering image on Acer P6500?
Adjust the "Tracking" to correct the unstable or flickering image. You may also try changing the display color depth settings on your computer.
How to fix Acer Projector image with vertical flickering bar?
Use the "Frequency" setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to make it compatible with the projector.
Why is the Acer P6500 image stretched when displaying a widescreen DVD title?
When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: * If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. * If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. * If you play an Letterbox (LBX) format DVD title, please change the format to Letterbox (LBX) in the projector OSD.
How to fix partial, scrolling or incorrectly displayed image on Acer Projector (For notebooks)?
Press "RESYNC" on the control panel. For an incorrectly displayed image: Follow the steps to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 20000:1 |
| Screen size compatibility | 20 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Vertical synchronization (max) | 0.12 kHz |
| Vertical synchronization (min) | 0.024 kHz |
| Keystone correction, horizontal | -30 - 30 ° |
| Horizontal synchronization (max) | 100 kHz |
| Horizontal synchronization (min) | 15 kHz |
| Focus | Manual |
| Throw ratio | 1.41 - 2.24:1 |
| Digital zoom | 2 x |
| Optical zoom | 1.6 x |
| Zoom capability | Yes |
| Focal length range | 20.91 - 32.63 mm |
| Aperture range (F-F) | 2.5 - 3.26 |
| Lamp type | UHP |
| Lamp power | 365 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Service life of light source (economic mode) | 4000 h |
| Analog signal format system | NTSC, PAL, SECAM |
| RMS rated power | 10 W |
| Number of built-in speakers | 2 |
| Power source | AC |
| AC input voltage | 120 - 230 V |
| Power consumption (standby) | - W |
| Power consumption (typical) | 460 W |
| Power consumption (PowerSave) | 367 W |
| Noise level | 30 dB |
| Noise level (economic mode) | 35 dB |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
| Cables included | AC, Component, Composite, VGA |
| Placement | Desktop, Ceiling |
| Product type | Large venue projector |
| Product color | Black |
| Market positioning | Presentation |
| Built-in display | - |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Weight and Dimensions| Weight | 4500 g |
|---|
Instructions for safely powering down and cleaning the projector, plus safe power cord handling.
Key warnings regarding water, placement, ventilation, and objects near the projector.
Guidelines for safe electrical use and power source connection for the projector.
When to refer servicing to qualified personnel and conditions for service.
Essential do's and don'ts for projector operation and care.
Key precautions to maximize the projector's lifespan and performance.
Instructions and diagrams for connecting various input devices.
Steps to power on, off, and select input sources.
Explanations of OSD messages and solutions for projector issues.
Detailed steps for safely replacing the projector's lamp module.
To Next Page
