To Next Page
R
Ricardo KirkSep 13, 2025
Why is my Acer P6500 Projector image reversed?
- JjacksonmichaelSep 13, 2025
Select "Image --> Projection Mode" on the OSD and adjust the projection direction.
Why is my Acer P6500 Projector image reversed?
Select "Image --> Projection Mode" on the OSD and adjust the projection direction.
Why does the Acer P6500 lamp burn out or make a popping sound?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 20000:1 |
| Screen size compatibility | 20 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Vertical synchronization (max) | 0.12 kHz |
| Vertical synchronization (min) | 0.024 kHz |
| Keystone correction, horizontal | -30 - 30 ° |
| Horizontal synchronization (max) | 100 kHz |
| Horizontal synchronization (min) | 15 kHz |
| Focus | Manual |
| Throw ratio | 1.41 - 2.24:1 |
| Digital zoom | 2 x |
| Optical zoom | 1.6 x |
| Zoom capability | Yes |
| Focal length range | 20.91 - 32.63 mm |
| Aperture range (F-F) | 2.5 - 3.26 |
| Lamp type | UHP |
| Lamp power | 365 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Service life of light source (economic mode) | 4000 h |
| Analog signal format system | NTSC, PAL, SECAM |
| RMS rated power | 10 W |
| Number of built-in speakers | 2 |
| Power source | AC |
| AC input voltage | 120 - 230 V |
| Power consumption (standby) | - W |
| Power consumption (typical) | 460 W |
| Power consumption (PowerSave) | 367 W |
| Noise level | 30 dB |
| Noise level (economic mode) | 35 dB |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
| Cables included | AC, Component, Composite, VGA |
| Placement | Desktop, Ceiling |
| Product type | Large venue projector |
| Product color | Black |
| Market positioning | Presentation |
| Built-in display | - |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Weight and Dimensions| Weight | 4500 g |
|---|
Instructions for safely powering down and cleaning the projector, plus safe power cord handling.
Key warnings regarding water, placement, ventilation, and objects near the projector.
Guidelines for safe electrical use and power source connection for the projector.
When to refer servicing to qualified personnel and conditions for service.
Essential do's and don'ts for projector operation and care.
Key precautions to maximize the projector's lifespan and performance.
Instructions and diagrams for connecting various input devices.
Steps to power on, off, and select input sources.
Explanations of OSD messages and solutions for projector issues.
Detailed steps for safely replacing the projector's lamp module.
