Why does my Acer Projector have no image onscreen?
First, ensure the projector is connected as described in the Getting Started section and that none of the connector pins are bent or broken. Next, check if the projector lamp has been securely installed. Also, verify that you have removed the lens cap and the projector is switched on.
What to do if Acer Projector image is too small or too large?
Adjust the zoom lever on the top of the projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote control, go to "Image - -> Aspect Ratio" and try different settings, or press "RATIO" on the remote control to adjust directly.
What to do if Acer Projector stops responding to all controls?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
What to do if the screen of the notebook computer is not displaying your presentation on Acer P6600?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
What to do if the Acer P6600 Projector image is out of focus?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, make sure the projection screen is within the required distance of 3.3 to 28.1 feet (1.0 to 8.6 meters) (XGA series) / 3.3 to 30.7 feet (1.0 to 9.4 meters) (1080p series) / 3.3 to 29.9 feet (1.0 to 9.1 meters) (WUXGA series) from the projector.
How to fix slanted sides on Acer Projector image?
If possible, reposition the projector so that it is centered on the screen. Alternatively, press the “Keystone / “ button on the remote control until the sides are vertical.
How to correct unstable or flickering image on Acer P6600?
Adjust the "Tracking" to correct the unstable or flickering image. You may also try changing the display color depth settings on your computer.
How to fix Acer P6600 image with vertical flickering bar?
Use the "Frequency" setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to make it compatible with the projector.
Why is the Acer Projector image stretched when displaying a widescreen DVD title?
When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: * If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. * If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. * If you play an Letterbox (LBX) format DVD title, please change the format to Letterbox (LBX) in the projector OSD.
How to fix partial, scrolling or incorrectly displayed image on Acer P6600 (For notebooks)?
Press "RESYNC" on the control panel. For an incorrectly displayed image: Follow the steps to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
General| Display Type | DLP |
|---|---|
| Zoom Ratio | 1.1x |
| Speakers | 10W |
| Projection Technology | DLP |
| Resolution | 1024 x 768 (XGA) |
| Contrast Ratio | 20000:1 |
| Keystone Correction | Vertical ±40° |
| Video Compatibility | NTSC, PAL, SECAM, HDTV |
| Input Connectors | HDMI, VGA, Composite, S-Video, USB |
| Projection Size | 30" to 300" |
To Next Page
