9
Note: Use a shielded LAN cable up to 100 meters in length rated at
CAT5e or better.
Note: The maximum transmission distance is 100 m.However, it
may be shorter under some circumstances.
Note: Avoid using the LAN cable when it is coiled or bundled.
Note: Inserting or removing the LAN cable during projection may
cause noise.
Note: Connectivity with all HDBaseT transmitters on the market is
not guaranteed.
Note: Some HDBaseT transmitters may not enable correct
projection when used to connect source equipment to the
projector.
Note: Commands cannot be received through HDBaseT when the
projector is in standby mode.
To Next Page
Loading...
