Acer V193

- 5 -
3. Product Overview
3.1. Introduction
V193 is defined as our new 19” model in ACER V series which will be the ACER project in Qisda. V193 is
defined as 19” LCD Monitor supports 1280(H) x 1024(V) resolution with DPMS (Display Power Management
System) and ACER eColor function. There are triple input types, D-sub, DVI. V193 adopts AUO panel
M190EG02 V7, LGD panel LM190E08-TLJ2. V193 has included 1W+1W speaker. V193 also support ACM
10000:1.
The features summary is shown as below,
*All panel spec. in Q201 definition depends on the variance of panel source.
*All spec. of monitor need to warm up at least 1hr.
* To test the “Contrast Ratio” and “Luminance” functions, the color status must be “User preset” mode.
* 1. “Contrast Ratio”: Set “brightness” at 100, and “contrast” at 50.
* 2. “Luminance”: Set “brightness” at 100, and “contrast” at 100.
Feature items
Specifications
Remark
Panel supplier & module name
AUO M190EG02 V7
LGD LM190E08-TLJ2
TN, Normally white
Screen diagonal
19”
376.32(H) x 301.6(V)
Display Format
1280(H) x 1024 (V)
Panel Display information
Pixel Pitch
AUO: 0.294 mm x 0.294 mm
LGD: 0.294 mm x 0.294 mm
per one triad
Viewing Angle (@ Contrast Ratio >= 10)
AUO:
R/L: 160 degrees (typ)
U/D: 160 degrees (typ)
LGD:
R/L: 170 degrees (typ)
U/D: 160 degrees (typ)
Analog interface with Scaling supported
Yes
With 15-pin D-sub connector
HDMI interface with Scaling supported
NA
Max resolution mode supported
1280 (H) x 1024(V)@75Hz
Number of Display Colors supported
16.7 Millions
Contrast Ratio
AUO:1000 (typ.),600:1(min)
LGD:800 (typ.), 500(min)
Test Condition: Set Contrast
at 50, Brightness at 100,
Color at User preset
Luminance
250 cd/m
2
(typ.),200 cd/m
2
(min)
Test Condition: Set Contrast
at 50, Brightness at 100,
Color at User preset