English
2. Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the
right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Blue
Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note:
Adjusts the balance between light and dark shades.
6. Contrast: Adjust the contrast from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note:
brightness without changing lighter shades.
8. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
-----------------------------------------------------------------------------------------------------------
Note:
A higher value allows more blue light to pass through, so in order to
9.
Note:
Set to "On", will be based on the current screen to dynamic contrast adjustment.
10.
can simulate high-resolution images by boosting the pixel density of the original source
to make images sharper and clearer.
11. HDR:
Can control (off / Auto ) the default is off, set to auto will automatically
detect and deal with HDR signal.
-----------------------------------------------------------------------------------------------------
Note:
• When HDR=Auto, the Modes will also be automatically set to “HDR”.
• When HDR=Auto, some parameters: (ACM, Gamma, Contrast, Blue
change other adjustable parameters, the “Modes” will not jump to “User”
Mode.
To Next Page
Loading...
