Acer Veriton 5800 - Page 52

50 Chapter 2
Alt+F4 : Hidden Setting
The following table describes the parameters found in this menu:
Parameter Description
Chassis Opened Warning Warning beep alerts as chassis opened. Enabled
Disabled
Shutdown Temperature This feature allow to set the Shutdown
temperature.
90 C/194 F
Disabled
Current Voltage (V) Vcore /DDR18V/
+1.5V/+3.3V/+5V/+12V
Detect system’s voltage status automatically
CPU Temperature Detect CPU Temperature automatically
CPU / SYSTEM FAN Speed (RPM) Detect CPU/SYSTEM Fan Speed status automatically
CPU Smart Fan Function This item allows you to enable or disable the
SMART fan control function
Enable
Disabled
Hidden Setting
System Smart Fan Function Enabled/Disabled
Chassis Opened Warning [Disabled]
Item Help
Chassis Opened No
Menu Level X
Shutdown Temperature
[90
o
C/194
o
F]
VCore 1.34V
+1.5V 1.50V
+ 3.3V +3.33V
+5V 5.09V
+12V 11.78V
Current CPU Temperature
59
o
C
Adjust CPU Temperature Negative
CPU Temperature Offset 15
Current System Temperature
28
o
C
Adjust System Temperature Negative
System Temperature Offset 8
Current CPU Fan Speed 1784 RPM
Current System Fan Speed 1220 RPM
CPU Smart Fan Function [Enabled]
Low CPU Temperature
56
o
C
Temp Range for CPU Fan
32
o
C
CPU Fan PWM Duty 65
System Smart Fan Function [Enabled]
Low System Temperature
28
o
C
Temp Range for System Fan
10
o
C
System Fan PWM Duty 85
CMOS Setup Utility-Copyright © 1984-2005 Award Software
PC Health Status
KLIJ: Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1: General Help
F5: Previous Values F7: Default Settin
g
°°