Acer Veriton L4610G - Checking Jumper Settings

64
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Type Description Setting (Default) illustration
CLR_CMOS 3-pin CLEAR CMOS
1-2: NORMAL
2-3: CLEAR
Before clearing the CMOS, make sure
to turn off the system.
1
CLR_COMS
ME_DISABLE
3-pin ME Disable
1-2: NORMAL 1
2-3: ME disable
1
ME_DISABLE
BIOS_WP 3-pin
BIOS write
protect
1-2: BIOS PROTECT
2-3: NORMAL
1
BIOS_WP
To avoid the system unstability after clearing CMOS, we recommend users to enter the main
BIOS setting page to “Load Default Settings” and then “Save Changes and Exit”.