LED1~3
LED1 (LAN LED)
The LED1 can be used to indicate LAN status. The LED keeps blinking when the LAN is in Active
mode.
System Status LED
Active Blinking
LED2 (HDD LED)
The LED2 can be used to indicate HDD status. The LED keeps blinking when the HD is in Active
mode.
System Status LED
Active Blinking
System Status LED
LED3 (System Power LED)
The system power LED can be used to indicate system power status. The LED is on when the
system is operating. The LED keeps blinking when the system is in S1/S3 sleep state. The LED is
off when the system is in S4 sleep state or powered off (S5).
System Status LED
S0 On
S1/S3 Blinking
S4/S5 Off
This concludes Chapter 2. The next chapter covers the BIOS.
To Next Page
Loading...
