2 Chapter 1
• Dual channel support
• Support Intel Flex Memory Mode
• Capacity support:
• 1GB/2GB/4GB DDR3 1.5V 1333/1066 Un-buffered Non-ECC DIMM support
• 1 GB to 16GB Max memory support(using 4Gb tech)
• DDR3 1.5V 1066/1333
• Design Criteria:
• Should meet Intel Sandy Bridge Family design guide
• Support 1.5V DIMM
• Dual channel should be enabled always when plug-in 2 same memory size DDRIII memory
module
• Population Rule:
• Slot 0 must always be populated
Hard disk drive
• Support SATA interface.
• 3.5”, 25.4mm, 80/160/320/500/640/1TB/2TB G or higher capacity.
• 5400/7200 rpm or higher".
• Capacity and models are listed on AVLC.
Optical disk drive
• Support SATA 5.25” standard ODD.
• Support DVD-ROM, DVD-SuperMulti (Label Flash), BD-DVD, BD-Combo. BD-RW.
• Capacity and model is listed on AVLC.
Graphics
• Intel® HD Graphics Support
• Dual independent display
• Digital display (HDMI/DVI/DP) and VGA
• DVMT 5.0 technology support
• Enhanced 3D and Clear Video technology support
• 1 D-sub VGA port on rear
• 1 DVI-D port at rear side
• 1 Display port on rear
• Dual View function support (Should provide priority list)
• Need to measure VGA follow Acer VGA SOP
• Monitor compatible is requested to the monitor AVL and DQM recommended list
Graphics card support
• No mechanical retriction to support for double slot, full length graphics cards in the single PCIe X16 slot.
Serial ATA controller
• Slot Type: SATA connector
• Slot Quantity: 5
• 6Gb/s*1 for Q65
• Storage Type support:
To Next Page
Loading...
