2 Chapter 1
• Support Intel Flex Memory Mode.
• Capacity support:
• 1GB/2GB/4GB DDR3 1.5V 1333/1066 Un-buffered Non-ECC DIMM support.
• 1 GB to 16GB Max memory support(using 4Gb tech).
• DDR3 1.5V 1066/1333.
• Design Criteria:
• Should meet Intel Sandy Bridge Family design guide.
• Support 1.5V DIMM.
• Dual channel should be enabled always when plug-in 2 same memory size DDRIII memory
module.
• Population Rule
• Slot 0 must always be populated.
• Follow Intel design guide and spec.
Hard disk drive
• Support SATA interface.
• 3.5”, 25.4mm, 80/160/320/500/640/1TB/2TB G or higher capacity.
• 5400/7200 rpm or higher".
• Capacity and models are listed on AVLC.
Optical disk drive
• Support SATA 5.25” standard ODD.
• Support DVD-ROM, DVD-SuperMulti (Label Flash), BD-DVD, BD-Combo. BD-RW.
• Capacity and model is listed on AVLC.
Graphics
• Intel® HD Graphics Support
• Dual independent display
• Digital display (HDMI/DVI/DP/eDP) and VGA
• DVMT 5.0 technology support
• Enhanced 3D and Clear Video technology support
• 1 D-sub VGA port on rear
• 1 DVI-D port at rear side
• Dual View function support
• Need to measure VGA follow Acer VGA SOP
• Monitor compatible is requested to the monitor AVL and DQM recommended list
Graphics card support
• No mechanical retriction to support for double slot, full length graphics cards in the single PCIe X16 slot.
Serial ATA controller
• Slot Type: SATA connector
• Slot Quantity: 3(6Gb/s*1 for Q65, must use different color to define, other are 3Gb/s)
• Storage Type support:
• 3.5” SATA/SATAII/SATAIII HDD
• Combo/ DVD supermulti/Blue-ray DVD ODD
To Next Page
Loading...
