Tear off tapes of the SPK wire, extract the SPK wire from the IF BD and disassemble
the SPK from the MF as picture 1.
Tear off the black tape of the lamp wire, tear off black mylar on SHD and extract the
lamp wire from the P/BD as picture 2.
Extract the LED wire from the IF BD and tear off the wire from the SHD as picture 3.
Extract the LVDS from the panel as picture 3.
Remove the SHD.
Unlock 2 TRIM screws and disassemble the ASSY TRIM from the MF as picture 1.
Disassemble the LED BD from the Trim and extract the LED wire from the LED BD as
picture 2.
Unlock 9 screws from the MF from the picture 1.
Disassemble the MF from the Panel and extract the lamp wire from the panel as picture
2.
To Next Page
Loading...
