Acer VG272U - Page 22

English
6. Modes:To choose scenario mode.
7. Grayscale Mode:To choose Grayscale mode.
8. sRGB: Default is off. You can turn sRGB on or off to better color match with peripheral
devices, such as printers and digital cameras.
9. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
10. 6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.
-----------------------------------------------------------------------------------------------------------
Note:
HDR/ON HDR/OFF
OD Adjustable Adjustable
AdaptiveSync Adjustable Adjustable
VRB Cannot be adjustable Adjustable
Audio
Mode - Stardard
70
Picture
Volume
X
Enter
Move
Off
Mute
Color
OSD
System
Save Sengs to...
Audio
Gaming
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Volume: Adjust the volume
5. Mute:To choose mute on/off .
Gaming
Mode - User
Picture
Color
Over Drive
Normal
OnAdapveSync
OffVRB
Enter
Move
OffAim Point
OSD
System
Save Sengs to...
Audio
Gaming
Off
Ultra-Low Latency
OffRefresh Rate Num