Acer X203H - Page 30

- 30 -
4.2.2 Disassembly SOP
Preparation before disassemble
1. Clean the room for disassemble
2. Identify the area for monitor
3. Check the position that the monitors be placed and the quantity of the monitor ;prepare the
area or material flow; according to the actual condition plan the disassemble layout
4. Prepare the implement, equipments, materials as bellow:
1) Press-fixture
2) Working table
3) Screw-driver
4) Knife*1
5) Glove
6) Cleaning cloth
7) ESD protection
item
picture Operation Tool Notes
1
Disassemble the stand
 4 screws
Screw-driver
Kick the board first.
2
Disassembly the bezel
from the monitor, notice
the disassembly order :
1.Left (1) parts of bezel
2.Top (2) parts of bezel
3.Bottom (3) parts of
bezel
4. Right (4) parts of
bezel
Don’t draw the BZL
When disassembly
the bezel ,notice
don’t bend the
C/B .man must wear
glove
The purpose is
loose the BZL
3
Turn over the
monitor ,dismantle the
Rear cover from the
monitor