Acer X203H

- 23 -
4.2 Disassembly /Assembly
4.2.1 Assembly SOP
Preparation before assemble
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipments, materials as bellow:
1) Press-fixture
2) working table
3) Screw-driver
4) knife*1
5) glove
6) cleaning cloth
7) ESD protection
item
picture Operation Tool Notes
1
Stick the big Al tape to
panel which can protect
the Light-wire.
The tape must
cover the connect of
the wire
2
Check and put CLM-F
on the cushion
carefully,
3
Assemble the panel on
CLM-F.
Go to with Left.