45
Purchase ARM-USB-TINY-H TOOL the company's contact way: fujian fuzhou xi chong automation co., LTD.,
Contact person: Hang.Xia Contact phone number: 15059972837
1.1.1 Install driver
When insert the msp430 tool to PC, you need to install the driver. we suggest use windows 10 64bit
1.1.2 Nvcygwin FW update
Run install.cmd, The installation path C:\nvcygwin（Setup copy runs on Disk C）
1.1.3 Take out the Olimex ARM-USB-TINY-H TOOL, Through it USB cable Connect to the prepared PC/NV
Open Device Manager and confirm that the device appears in the list.( In the red box below)
1.1.4 Go to the unzipped NvCYgwin-1.0.2 folder to execute UsbDriversTool.exe.
(nvcygwin-1.0.2\drivers\openocd\drivers\UsbDriverTool.exe)
Click on the options in the red box to install it
To Next Page
Loading...
