English
• Attaching the Base
Note: Remove the monitor and monitor base from its packaging . Carefully place the monitor
face-down on a stable surface -- use a cloth to avoid scratchin g the screen.
• Screen position adjustment
To optimize the viewing position, you can adjust the monitor tilt by using both of your
hands to hold the edges of the monitor as shown below. The monitor can be adjusted to
25 degrees up or 5 degrees down.
Note: Take care when performing the installation to avoid injuringTa
yourself.
Note: If installing with a wall mounting kit, it is recommended to use VESA
mounting kit (100x100) with M4x10 (L) mm screws to fix your monitor on the wall.
25°
-5°
To Next Page
Loading...
