Need help?Do you have a question about the Acer XV273K and is the answer not in the manual?
Read safety instructions carefully for future reference and follow all warnings.
Details normal LCD monitor behavior and potential issues like flickering or pixel blemishes.
Provides guidelines for safely cleaning the monitor, including unplugging it first.
Acer's commitment to environmental protection and responsible recycling of IT equipment.
Instructions on how to properly recycle electronic devices to minimize pollution.
Ensure the power outlet is easily accessible for quick disconnection.
Follow instructions to protect hearing, such as gradual volume increase and breaks.
Covers usage near water, unstable surfaces, ventilation, and inserting objects.
Guidelines for using electrical power, including outlet and cord safety.
Ensure correct power cord type, outlet usage, and extension cord ratings.
The grounding pin provides safety from electric shock and protects against noise.
Refer all servicing to qualified personnel to avoid risks and damage.
Lists situations like damaged cords or liquid spills that necessitate professional servicing.
Switch off the device in potentially explosive atmospheres and obey all signs and instructions.
Keep device and its enhancements with small parts out of reach of small children.
Statement regarding occasional pixel defects and their minimal impact on the image.
Details risks of physical injury from prolonged use, bad posture, and inadequate conditions.
Lists symptoms like numbness, pain, or stiffness related to incorrect computer usage.
Consult a physician for persistent discomfort or pain related to computer use.
Adjust viewing angle, use footrest, and raise sitting height for maximum comfort.
Avoid static posture, slouching, and walk around regularly to reduce strain.
Rest eyes frequently, blink often, and take breaks to prevent dryness.
Keep display clean, adjust position, brightness, and contrast for readability.
Minimize glare by adjusting display placement, room lighting, and using filters.
Avoid adjusting the display to an awkward viewing angle.
Avoid looking at bright light sources, such as open windows, for extended periods.
Take short breaks, stretch, breathe fresh air, and exercise regularly for relaxation.
Declaration of conformity with relevant Union harmonization legislations and standards.
Statement of conformance with Electromagnetic Compatibility Directive (2014/30/EU).
Statement of conformance with Low Voltage Directive (2014/35/EU).
Statement of conformance with Restriction of Hazardous Substances Directive (2011/65/EU).
Statement of conformance with Energy-related Products Directive (2009/125/EC).
Device complies with Part 15 of the FCC Rules, subject to specific operating conditions.
Identification of the responsible local manufacturer/importer for this declaration.
Check all items are present and save packing materials for future transport.
Lists LCD monitor, quick start guide, AC power cord, and optional DP/HDMI cables.
Instructions for securely attaching the monitor base, placing monitor face-down safely.
Adjust monitor tilt for optimal viewing position, up to 25 degrees up or 5 degrees down.
Exercise caution during installation to avoid personal injury.
Recommends using VESA mounting kit (100x100) with M4x10 screws for wall mounting.
Procedure for adjusting the monitor's height after pressing the top.
Swivel the monitor using the built-in pedestal for a comfortable viewing angle.
Rotate display clockwise or counter-clockwise to pivot the screen.
Ensure the correct power cord type is used for your region's voltage.
Monitor supports universal voltage (100/120 V AC or 220/240 V AC) without adjustment.
Connect the AC power cord to the adapter and then to an AC outlet.
Specific cord set requirements for 120V AC and 220/240V AC units.
Monitor enters power saving mode, indicated by an amber LED light.
DDC protocol enables plug-and-play and automatic configuration of monitor capabilities.
Details the pin assignments for the 20-pin color display signal cable.
Details the pin assignments for the 19-pin color display signal cable.
Table listing VESA modes with corresponding resolutions and refresh rates.
DSC functionality is required for transmitting 4K 160Hz signals via HDMI 2.1/DP 1.4.
Turn off computer, unplug power cord before connecting cables.
Connect signal cable to monitor's HDMI/DP input and computer's graphics card.
Insert the monitor power cable into the power port at the back of the monitor.
Plug the power cords of the computer and monitor into a nearby electrical outlet.
Audio output feature is only available for specific audio output models.
Description of external buttons: Power, Function Key 1-5.
Turns monitor on/off; LED indicates power status (blue=on, amber=standby).
Keys provide access to main page, hotkeys, input selection, and OSD menu.
Enables dynamic refresh rate adjustment for smoother, stutter-free visuals.
OSD allows adjustment of picture quality, OSD position, and general settings.
Displays current settings and provides access to various menu options.
Selects game modes (Action, Racing, Sports) or scenario modes (ECO, Graphics, HDR).
Opens the brightness control and allows selection of preferred brightness setting.
Choose input source like HDMI1, HDMI2, DP, or Auto Source.
Press the MENU key to open the On-Screen Display menu.
Use the joystick to navigate through OSD menus and select options.
Use the joystick to adjust values or slide scales for settings.
Access the OSD to configure and use Game Assistant features.
Use the joystick to navigate to the Game Assistant menu.
Use the joystick to control various functions within the Game Assistant menu.
Adjust Timer, Aim Point, and Sniper Mode settings via Game Assistant.
Access the OSD to configure gaming-specific settings.
Use the joystick to navigate to the Gaming section within the OSD.
Use the joystick to adjust gaming settings like FreeSync Premium and latency.
Enable or disable FreeSync Premium for smoother, tear-free gaming.
Reduce input lag by enabling Ultra-Low Latency for faster response times.
Shows the current refresh rate of the monitor panel on screen.
Adjust overdrive settings (Off, Normal, Extreme) for motion clarity.
Enable VRB for cleaner dynamic picture; default is Off.
Access the OSD to adjust picture settings like brightness and contrast.
Use the joystick to navigate to and select options within the Picture menu.
Use the joystick to adjust sliding scales for various picture settings.
Adjust Brightness, Contrast, Black Boost, Low Blue Light, ACM, Super Sharpness.
Adjust brightness level from 0 to 100 for optimal viewing.
Adjust contrast level from 0 to 100 to set light and dark area differences.
Adjust black level from 0 to 10 to enhance shadow detail.
Reduce blue light to protect eyes, with levels 1 through 4 available.
Enable or disable Adaptive Contrast Management for dynamic contrast adjustment.
Enhance image sharpness using Super Sharpness technology by boosting pixel density.
HDR settings can be accessed via the Mode hotkey.
Displays the HDR settings menu within the OSD interface.
Shows the current HDR status (Off, Auto).
Details on HDR function availability (Optional, Auto, Off) and behavior.
Features like ACM, Gamma, etc., are unavailable in HDR Auto mode.
Color page shows adjustable functions when HDR is set to Auto.
Access the OSD to adjust color settings.
Use the joystick to navigate to and select options within the Color menu.
Use the joystick to adjust sliding scales for color settings.
Adjust luminance tone using Gamma mode, default is 2.2 for Windows.
Set color temperature to Cool, Normal, Warm, Low Blue Light, or User.
Select different scenario modes for color profiles.
Choose color space like sRGB, Rec.709, HDR, EBU, DCI, SMPTE-C, or General.
Rules for synchronizing Color Space with Modes, e.g., HDR with HDR.
Details on CIE 1931 color error and its relation to HDR fine-tuning.
Configuration mapping for HDR color space, Modes, and Picture page HDR settings.
Brightness adjustment behavior for SDR content versus fixed brightness for HDR.
Color Space defaults to 'General' when specific modes are selected.
Access the OSD to adjust audio settings.
Use the joystick to navigate to and select options within the Audio menu.
Use the joystick to adjust sliding scales for audio settings.
Adjust the monitor's volume level.
Enable or disable the audio mute function.
Press the MENU key to open the On-Screen Display menu.
Use the joystick to navigate to and select options within the OSD menu.
Use the joystick to adjust sliding scales for OSD settings.
Set the desired language for the OSD menu.
Set the time delay before the OSD menu automatically closes.
Select OSD transparency level (0%-80%) when using gaming mode.
Lock or unlock OSD controls to prevent accidental changes.
Information on OSD locked status, message display, and LED indication.
Information on OSD unlocked status, message display, and LED indication.
Access the OSD to adjust system settings.
Use the joystick to navigate to and select options within the System menu.
Use the joystick to adjust sliding scales for system settings.
Select the video input source from HDMI1, HDMI2, or DP.
Automatically detects and switches to the active input source (default On).
Choose screen aspect ratio: Aspect, Full, or 1:1.
Select functions for shortcut keys 1 and 2.
Control monitor settings via PC software using DDC/CI.
Adjust HDMI black level for optimal contrast.
Enable Quick Start mode for faster boot-up speed.
Enable or disable Display Stream Compression (DSC) for compatible signals.
Explains DSC default setting (On) and Off mode behavior for compatibility.
Enable or disable Deep Sleep mode for power saving (default is On).
Explains Deep Sleep default setting and Off mode for DP device compatibility.
Access the OSD to save custom settings.
Navigate to the 'Save Setting to...' option in the OSD.
Save custom settings to three user-defined profiles for gaming modes.
Troubleshooting steps for HDMI/DP connection issues, like no picture visible.
Solutions include adjusting brightness/contrast, checking power switch, and cables.
Interpreting LED status (Blue, Off, Amber) for diagnosing problems.
Acer monitor is for video and visual display of information from electronic devices.
Information related to EU energy regulations and product energy usage.
To Next Page
General
