Acer XV273K - Picture Settings; Accessing Picture Menu; Navigating Picture Options; Adjusting Picture Parameters

English
------------------------------------------------------------------------------------------------------
Note:
------------------------------------------------------------------------------------------------------
Note:
Picture
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Low
Blue Light, ACM,Super Sharpness.
5. Brightness: Adjust the brightness from 0 to 100.
Adjusts the balance between light and dark shades.
Picture
Color
Audio
OSD
Low Blue Light
ACM
HDR
System Super Sharpness
Gaming
Standard
Mode
3840×2160
Resolution
60
Hz
HDMI1
Input
On
FreeSync Premium
Game Assistant
Black Boost
Contrast
Brightness
Enter
Move
X
3. VRB set " ", when to adjustment (Brightness, Low Blue
Light, ACM), will auto set VRB is "Off ".
4. VRB function does not affect the (Logo, Aim Point, Message and Input Icon)
brightness.
5. VRB setting "
", when detection of Input Timing <75Hz,
will auto off the VRB and gray out to disable.
6. VRB = (Normal or Extreme), because the IC control dynamic picture is
cleaner, so the overall Brightness will be dark, "Extreme" will be darker than
“Normal”.
9. Black Boost Pro: The Black Boost Pro is on, it will compensate for the brightness of
the dark level, so that the objects under the dark level can be clearly seen.
• Black Boost Pro default is “Off”.
• Black Boost Pro is “On”, the HDR is auto be set Off.