Acer XV273K - Color Settings; Accessing Color Menu; Navigating Color Options; Adjusting Color Parameters

English
------------------------------------------------------------------------------------------------------
Note:
Color
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard
value for Windows).
5. Color temperature: Default is warm. You can choose Cool, Normal, Warm, Low Blue Light
or User.
6. Modes:To choose scenario mode.
Color Space: You can choose sRGB, Rec.709, HDR, EBU, DCI, SMPTE-C and General.
7.
Color Space = HDR to correspond Modes is HDR, Other Color Space the
Modes=Standard.
• CIE 1931 positive and negative error of 0.05, ("HDR" according to current Panel
to fine-tune).
• Color Space = HDR, the Modes = HDR, Picture page HDR = Auto.
• The signal content is SDR, the brightness can to adjustment, but content is HDR
• Modes = (Action/Racing/Sports/User/Standard/ECO/Graphics) is selected; the
color space is auto set to “General”.
the brightness is fixed at 100 and gray out unavailable.
Picture
Color
Audio
OSD
Gamma
Color Temp.
6-axis Hue
System 6-axis Saturate
Gaming
Standard
Mode
3840×2160
Resolution
60
Hz
HDMI1
Input
On
FreeSync Premium
Game Assistant
Grayscale Mode
Color Space
Modes
Enter
Move
X