Gen II User Manual
8-17 – Tail Rotor Balance Chapter 8 Revision 3.00, April 2020
If the setup has more than one condition, press the [F2] “Next Cond” key to view the
data for the second condition.
Pressing the [F3] “Polar” key will display the data in a polar chart format.
When finished reviewing, press [OK] to continue to the solution process.
8.3.9. – Shut Down Engines
A screen directing you to shut down the engine(s) will appear next. You can use the [F0]
“Back Up” key to return to the prior screen. Shut down and press [F5] “Continue” to
proceed.
8.3.10. – Tail Rotor Maximum Weight *Warning*
The next screen will present a reminder about the maximum weight allowed on the tail rotor
as defined in the setup. Press the [F5] “Continue” key to advance to the next screen.
To Next Page
Loading...