welding
Size of applicable chips
Size of
applicable PCB
≤70mm×70 mm
≤400mm×305 mm
Hardware description
LY IR6000 BGA Rework Station is composed of upper part of Heating Components /
Bottom Preheat Module / Bracket / Temperature Control Parts! Temperature control
Table is control the upper and lower heating, Can Simultaneously heated or first preheat,
then the upper part of heating.
1. Highly Sensitive K-temperature sensor
2. PCB Table
3. Power Switch
4. Upper Heater
5. X-Y Lifting Regulator
6. LED Auxiliary Lighting
7. Bottom Heater (Pre-Heater)
深圳利洋焊接设备 Shenzhen LiYang welding Equipment Co., Ltd
LY
WWW.LYBGA.COM
6
To Next Page
Loading...
