Check the silica in the air dryer weekly. Please refer to instruction sheet
located on Page 22.
Check operation indicator lights bi-weekly and ensure lights are on during
operation.
Check the water column level regularly, ensure the clear hose gauge shows
the water is at a mid-level and add water if required (See page 14).
Check the ozone system monthly with thorough visual inspection. Ensure
there are no obvious leaks or problems with the systems operation.
Immediately report any major concerns.
Always prime the system after it has not run for several days – prime by
turning a tap on (best if closest to system) on and quickly off to get ozone
circulating in the system prior to discharge.
Change cartridge filters when required and follow the instructions that come
with the cartridge filter. Remember to flush filters before consuming water
from the system.
If there is any noticeable difference in the look, smell or taste of your water,
immediately discontinue use, check the system and perform maintenance as
required.
To Next Page
Loading...