13-
4.14 Foot Controller (CA-8F)
LED-0408 can work with CA-8F, when the CA-8F connect with the
LED-0408, pressing the BLACKOUT button on LED-0408 for 3
seconds to active the CA-8F; pressing the STANDBY button on
CA-8F for 3 seconds to active the LED-0408. When the STAND BY indicator is blinking,
means the LED-0408 is active, when the indicator is not blinking, means the CA-8F is
active. The functions are shown below:
CA-8F
STAND BY (LED1)
LED blinking LED off LED on
SWITCH TO
LED-0408
CA-8F
ACTIVATE
STAND BY
FUNCTION
CHASE
SELECT
NEXT STEP
STROBE
ACTIVATE
MODE(LED2)
LED on LED blinking LED off
MUSIC RUN MANUAL RUN STROBE
2-
1. Features
1. Light and Easy is an user friendly LED controller.
2. Designed to work on all 4-Channel LED lighting fixtures
3. Control up to 32 channels of 8 LED groups
4. 8 individual button s for selecting 8 groups of lighting fixtures
5. LED display for easy navigation
6. 8 Colour pre-set buttons with 4 Banks, 32 pre-set colours in total.
7. 8 Chases, each can save up to 32 scenes
8. 3 operation modes Auto, Sound, Manual.
9. Blackout function and instant strobe access button with variable speed.
10. Optional Foot Controller (CA-8F) for ease of operation.
NOTE:
A knowledge of DMX is required to fully utilize this unit.
To Next Page
Loading...
