ACME PIXEL LINE IP - Technical Specifications

- 6 -
02/ Technical Specifications
Power Voltage
100-240V~ 50/60Hz
Power Consumption
420W
Light Source
672x0.5W RGB LED
112x3W CW LED
Beam Angle
101° (RGB)
108° (CW)
Field Angle
149° (RGB)
152° (CW)
Dimmer/Strobe
0-100% smooth dimming; High output strobe effect
Control
DMX Channel
7/15/21/39/112/17/33/65/68/117/70
Channels
Control Mode
DMX512
RDM
Art-Net
sACN
Firmware Upgrade
Firmware Upgrade via DMX link
Construction
Display
OLED display
Data In/Out
5-pin IP XLR (3-pin IP XLR is optional)
RJ45 Connector
Power In/Out
Waterproof Power Connector in/out
Protection Rating
IP66
Description for power cord set should be used: Listed 5-15P or 6-15P plug molded with
SJTW flexible cord with rating: 300V, 105°C, VW-1, 16AWGx3C, molded with attachment
plug and cord connector model SAC3FX with rating 250VAC, 16A by "Ningbo Haishu
District Seetronic Electronic Co Ltd ". The length of power cord shall be at least 914mm (lt
is to be measured from the face of the attachment plug to the face of the Cord Connector).
Features
32 RGB LED zones can be controlled individually
16 CW LED zones can be controlled individually
Outstanding color mixing effect
Independent frost effect
Multiple fixtures can be split-jointed with tool-free junction buckle