ACME Super Dotline - Page 20

- 19 -
DMX Settings
Enter the control menu and select DMX Settings, press ENTER. Use the UP/DOWN button
to select Port A Address, Port B Address, DMX Channel Mode, No DMX Status, View DMX
Value, Connect Option, Network, Art-Net Settings, sACN Settings or Artnet to DMX.
Port A Address
Port B Address
Select Port B Address, press ENTER.
Use UP/DOWN button to select an address, confirm your selection with
ENTER.
CHANNEL MODE
DMX ADDRESS
8+100 CH
1-413
8+160 CH
1-353
To exit the menu, press MENU, or wait 30 seconds.
Select Port A Address, press ENTER.
Use UP/DOWN button to select an address, confirm your selection with
ENTER.
CHANNEL MODE
DMX ADDRESS
17 CH
1-496
27 CH
1-486
99 CH
1-414
108 CH
1-405
168 CH
1-345
8+100 CH
1-505
8+160 CH
1-505
21 CH
1-492
To exit the menu, press MENU, or wait 30 seconds.