ACME Super Dotline - Page 22

- 21 -
Network
Art-Net Settings
sACN Settings
Artnet to DMX
Select Artnet to DMX, press ENTER.
Use UP/DOWN button to select No or Yes, confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select sACN Settings, press ENTER.
Use UP/DOWN button to select sACN Universe or sACN Priority,
confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Art-Net Settings, press ENTER.
Use UP/DOWN button to select Net, Sub-Net, Universe A or Universe B,
confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Network, press ENTER.
Use UP/DOWN button to select IP Address or Subnet Mask, confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.