ACME TORNADO - Page 20

- 19 -
Dimmer Speed
White Balance
LED Refresh Rate
Cooling Mode
Head Invert
Select Cooling Mode, press ENTER.
Use UP/DOWN button to select Standard or Quiet, confirm your
selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select White Balance, press ENTER.
Use UP/DOWN button to select LED R, LED G, LED B, LED R1, LED G1,
LED B1…… or LED R5, LED G5, LED B5, confirm your selection with
ENTER.
Use UP/DOWN button to select a value between 125 and 255, confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Head Invert, press ENTER.
Use UP/DOWN button to select No or Yes, confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select LED Refresh Rate, press ENTER.
Use UP/DOWN button to select 900Hz, 1000Hz, 1100Hz, 1200Hz,
1300Hz, 1400Hz, 1500Hz, 2500Hz, 4000Hz, 5000Hz, 6000Hz, 10KHz,
15KHz, 20KHz or 25KHz, confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Dimmer Speed, press ENTER.
Use UP/DOWN button to select Fast or Smooth, confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.