ACME TORNADO - Page 30

- 29 -
LED G
LED B
LED L
LED R1
LED G1
LED B1
Select LED B1, press ENTER.
Use UP/DOWN button to select a value between 0 and 255, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select LED G1, press ENTER.
Use UP/DOWN button to select a value between 0 and 255, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select LED R1, press ENTER.
Use UP/DOWN button to select a value between 0 and 255, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select LED L, press ENTER.
Use UP/DOWN button to select a value between 0 and 255, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select LED B, press ENTER.
Use UP/DOWN button to select a value between 0 and 255, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.
Select LED G, press ENTER.
Use UP/DOWN button to select a value between 0 and 255, confirm
your selection with ENTER.
To exit the offset menu, press MENU, or wait 30 seconds.