Acqiris SA220P - Page 39

3.2 Simultaneous acquisition and readout (CST option)
Acqiris SA220P User's Manual 39
Interface Method / Property name
IAqMD3StreamSamples
BitsPerSample
Indicates the number of bits per
sample.
DataTruncationBitCount
Specifies the size in bits of an out-
put stream Element. Ignored if
DataTruncationEnabled is False.
DataTruncationEnabled
Specifies whether the Data Trun-
cation is enabled.
DataTruncationKeepMsb
Specifies whether the output
stream Element contains the most
significant or the least significant
bits of the raw ADC card data
sample. Ignored if DataTrun-
cationEnabled is False.
IVI-C
Function
AqMD3_StreamFetchDataInt32
This function returns a stream of Elements. The Ele-
mentSizeInBits and the meaning of each Element depend
on the StreamType.
AqMD3_GetStreamName
Returns the stream name that corresponds to the one-
based index that the user specifies.