Acqiris SA220P - How to Generate a Software Trigger

7.5 How to generate a software trigger?
Acqiris SA220P User's Manual 83
7.5 How to generate a software trigger?
A call to function AqMD3_SendSoftwareTrigger (IVI-C) or to method
IAqMD3Trigger.SendSoftwareTrigger (IVI.NET) sends a single software trigger.
SendSoftwareTrigger() must be called as many times as required.
Multi-record acquisitions required a trigger per record. Accumulated records require a trigger per
accumulation. SendSoftwareTrigger() needs to be called for each trigger event.