ACR Electronics AIS - 6 Accessories

6 Accessories
The following material is included with the NAUTICAST™.
NAUTICAST
Basic Kit
includes
1 NAUTICAST Transponder
1 installation manual, 1 user Manual
3 caps of plug
1 cable clamp (M5 thread)
1 guide plate Kit
3 angles + 3 mounting screws (screw bolt + square nut)
The NAUTICAST™ is supplied with some of the components listed below (contents depend
on customer requirements).
Category
Description
Order Number
Mountings:
Gimbal Style Mounting Kit + 2 wing bolts + 4 screws
2650
Mounting kit retro fit-frame + 3 screws, 3 clips, 3 nuts
2651
GPS antenna
solutions:
GPS Antenna AIS-A W/5M Coax
2637 (28dB Gain) or
2639 (20 dB Gain)
GPS Stantion Mount Plastic 1 x 14 thread (for P/N 2625 or P/N 2639)
2627
GPS Stantion Mount Metal 1 x 14 thread (for P/N 2625 or P/N 2639)
2626
GPS Deck Mount Metal 1 x 14 thread (for P/N 2625 or P/N 2639)
2821
Procom GPS antenna GPS 4
2622
Deck Mounting Kit Metal Horiz. Surface -ProCom (for P/N 2622 and 2623)
(Thread 1/12)
2623
VHF antenna
solutions:
VH-3200 VHF Stainless Steel Whip Antenna 91.4cm (36 in.) Includes
Mounting Kit & Plug PL Male for RG214
2628
Comrod VHF antenna AV 7 + mounting kit
2621
Single
antenna
solutions:
Comrod AC 17 - AIS (combined GPS/VHF antenna)
+ mounting kit
+ splitter and cable
2624
Cables and
Interfaces
GPS / VHF extender with N and TNC connection
+ 1 pcs N(m)/RG214 crimp
+ 2 pcs TNC(m)/RG214 crimp
+ 1 pcs PL(m)/RG214 crimp
2612
AIS connection box
2640
AIS cable open (3m) with all interfaces
+ pilot plug
2610
Connector N(m)/RG214 crimp
2631
Connector PL(m)/RG214 crimp
2632
Connector TNC(m)/RG214 crimp
2633
Gyro Converter 9028C
2641
Y1-03-0204 Rev. L
49