Need help?Do you have a question about the Acrel ADL3000-E and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Communication | RS485 (Modbus-RTU) |
| Power Consumption | <5VA |
| Mounting | DIN rail |
| Voltage Measurement Range | See Voltage Range |
| Relative Humidity | ≤95% (no condensation) |
| Measurement Parameters | Voltage, Current, Power, Energy, Power Factor, Frequency |
Covers the measurement of active and reactive energy in kWh.
Details the measurement of voltage, current, power, and power factor.
Describes the LCD display capabilities and features.
Explains how to program the meter using the keys.
Details the pulse output functions for energy metering.
Covers multi-tariff functions and other operational features.
Details the communication interfaces and protocols used by the meter.
Explains the temperature measurement capabilities using NTC sensors.
Specifies the voltage ranges and parameters.
Details the current input and accuracy specifications.
Specifies accuracy for active, reactive, and apparent power.
Details frequency measurement range and accuracy.
Specifies the operating temperature range for the meter.
Details energy measurement accuracy classes.
Specifies the clock accuracy.
Details energy pulse output specifications.
Specifies switching output capabilities and voltage limits.
Details switching input capabilities and voltage limits.
Specifies the pulse width for output signals.
Details the pulse constant for energy metering.
Specifies the communication interface and protocol (RS485, Modbus RTU).
Defines the range for Modbus communication addresses.
Specifies the supported baud rates for communication.
Specifies the operating relative temperature range.
Specifies the operating relative humidity range.
Illustrates wiring samples for voltage and current connections.
Details connections for switching input, output, and NTC terminals.
Describes the electrical parameters the meter can measure.
Explains how the meter calculates various energy types.
Details the timing functions, time zones, and tariffs.
Defines and explains demand measurement concepts.
Describes the history data recording capabilities.
Details the functionality of switching input and output.
Explains the temperature measurement feature.
Explains the function of each key on the meter.
Details the various display menus and their information.
Instructions for navigating and using the meter's key menu.
Explains how to configure data settings via menus.
Lists the register addresses for Modbus communication.
Details history energy data freezing and date recording.
To Next Page
