What to do if my Acson international Air Conditioner does not work?
If your Acson international Air Conditioner isn't working, start by checking the power supply. It could be a power failure or a blown fuse. Also, ensure the power plug is properly connected. Finally, verify that the delay timer is correctly set.
How to increase airflow in my Acson international Air Conditioner?
If the airflow from your Acson international Air Conditioner is too low, the first thing you should do is clean or replace the air filter. Also, make sure that doors and windows are closed. Finally, check the suction and discharge for any clogs and clear them.
Why is the remote control light dim on my Acson international Air Conditioner?
If the remote control light of your Acson international Air Conditioner is dim, it likely means the batteries are low. Replace the batteries. If that doesn't work, ensure the batteries are correctly inserted.
How to get rid of bad odor from Acson international Air Conditioner?
If your Acson international Air Conditioner emits a bad odor, it's likely due to particles like cigarette smoke or perfume that have adhered to the coil. Clean the coil to remove these odors.
Why is there condensation on my Acson international Air Conditioner?
Condensation on the front panel of your Acson international Air Conditioner is often due to air humidity after prolonged use. Allow the unit to stabilize. If the condensation persists, the set temperature might be too low. Try increasing the temperature and setting the fan to high.
Why Acson international Air Conditioner compressor does not work after starting?
If the compressor of your Acson international Air Conditioner doesn't start immediately, it might be due to a built-in protection against frequent starting. Wait for 3 to 4 minutes to see if it starts.
Warning regarding operation outside specified temperature and humidity limits.
Schematics for indoor units ACK 20/25A and ACK 30A.
Schematics for outdoor units ALC/A4LC 20/25B and ALC/A4LC 30C.
Checklist for R407C systems: tubing, oil, and specialized tools.
Guidelines for handling R407C, including filter-dryer and moisture precautions.
Instructions for charging R407C and servicing leaks, emphasizing evacuation.
Pre-installation site survey and guidelines for mounting the indoor unit.
Instructions for drain pipe installation, insulation, and conducting drain tests.
Site survey requirements for outdoor unit placement, considering environment and clearances.
Guidelines for installing the outdoor unit firmly and horizontally with proper clearances.
Recommendations for piping specifications to ensure unit capacity and reliability.
Guidelines for connecting refrigerant pipes, including material quality and brazing techniques.
Tables for calculating additional refrigerant charge based on piping length.
Diagram of charging method and caution for R407C handling.
Recommended maintenance tasks for unit components like filters, coils, and motors.
Guide to identifying and resolving common air conditioner malfunctions.
General| Brand | Acson international |
|---|---|
| Model | ALC 50CR |
| Category | Air Conditioner |
| Language | English |
To Next Page