ACT 612 - Battery Testing Procedure Steps; Powering Up; Set Calibration Reminder

Operating Instructions
www.actmeters.com
7
STEP 3
Provided there is sucient energy in the battery, the message
‘POWERING UP’ is displayed. During this period, a pulsed load
removes excess surface charge.
STEP 4
The message ‘SET CALIBRATE AS REQUIRED’ reminds you to check
that the Ah Calibration position is correctly adjusted to test the
battery type under test as in Step 1 to Step 3.
POWERING UP..
SET CALIBRATE
AS REQUIRED
<
−−
<
−−