EasyManua.ls Logo

ACT 612 - Test Complete; Recharge or Replace Advice; Flat Battery Warning

ACT 612
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions
www.actmeters.com
9
STEP 8
If required, press the test button again to verify the Ah reading
obtained. NOTE: Ah capacity available is determined by battery
temperature and state of charge.
Recharge or replace when Ah capacity available in the battery
falls below 65% of the stated battery Ah size. Check results
against the table of common battery sizes on the tester to
conrm.
‘FLAT BATTERY’ indicates low battery voltage or Ah capacity.
Recharge or replace the battery and retest.
TEST COMPLETE
FLAT BATTERY

Related product manuals