ACT 10 Digital Keypad
Guides to outdoor installation in
exposed areas.
• Do not apply silicone to the bottom of the
keypad as this will block the air vents and
trap any water which may enter the
keypad.
• If a weather cowl is fitted the same
applies.
• Do install a weather cowl when the
keypad is installed on an uneven surface
or if in a very exposed area.
• Do apply silicone to the top and two sides
of the keypad or cowl, when used.
• Do silicone all screw mounting positions
and cable entry.
To Previous Page
Loading...
