6 Monitoring the medical device
Before and after use, check the medical device and its accessories entirely for any problems. This is necessary to
detect any isolation fault or damage. If necessary, replace damaged parts.
Check the cleanliness of the handpiece nozzle. It must be clean, smooth and corrosion-free. The optical guide must fit
easily and firmly inside it.
Check the handpiece electrical connectors. These must be clean, smooth and corrosion-free. The battery must be able
to be screwed in easily.
User Manual • Mini LED™ • J02541 • V6 • (07) • 07/2016 • NG13EN010F - Page 17/30
To Next Page
Loading...