8 / 12 – User’s manual | Piezotome 2 Handpiece | J12821 | V4 |09 | 04/2018 | NO40EN050D
c) Drying
Dry with a clean, non-woven single-use cloth, so as to remove any traces of liquid.
d) Sterilization conditions
Place in single-use sterilization pouches or bags in compliance with the specifications defined in standard EN
ISO 11607-1, or in any equivalent standard required by the national regulations.
It is essential to sterilize the handpiece, with the tip removed.
e) Sterilisation
The P
IEZOTOME
LED handpiece body and its three elements must be sterilized individually in an autoclave (Fig.
2-B) under the following conditions:
- Autoclave: Type B compliant with standard EN 13060.
- Sterilization temperature: 134°C.
- Sterilization stabilization time: 18 minutes.
- Pressure: 2 Bars min.
Remove the P
IEZOTOME
LED handpiece-cord assembly from the autoclave as soon as sterilization is complete.
Caution
:
• Always sterilize the P
IEZOTOME
LED handpiece-cord assembly without the insert.
• After multiple use, and during successive sterilizations, make sure before use that the P
IEZOTOME
LED
handpiece-cord assembly has not been damaged on the outside.
f) Assembly
- Connect the LED ring to the P
IEZOTOME
LED handpiece, making sure it is positioned correctly (align the "+" marks
on the LED ring and on the handpiece body near the LED ring electrical contacts) (Fig. 3)
- Insert t h e optical guide into the P
IEZOTOME
LED
handpiece nose.
- Screw on the front part (nose) of the handpiece.
g) Disposal and recycling
Disposal of the device and its accessories should be via a collection centre for electronic apparatus or by
returning them to Satelec After Sales Service. In no circumstances should the device and its accessories be
disposed of by the user. The use of the WEEE symbol indicates that this product must not be treated as
household waste, but must be treated separately, in conformity to the Directive
2002/96/CE. By ensuring this product is disposed of correctly, you will help to protect the environment. For
more detailed information about the recycling of this product, please contact your local authority, your house
waste disposal service provider or where you purchased the product. At the end of their life, tips should be
discarded in safety containers designed for this purpose
2. 2 REPLACEMENT
The P
IEZOTOME
LED handpiece must be replaced when the thread no longer holds the tips adequately and when
repeated sterilization cycles lead to visible damage of the casing (cracks, scratches).
The optical guide and the light ring of the P
IEZOTOME
LED handpiece must be replaced when the light intensity
is no longer sufficient and when repeated sterilization cycles lead to visible damage (cracks, scratches).
To Next Page