Need help?Do you have a question about the Acteon XMIND DC and is the answer not in the manual?
Essential preliminary details before using the radiographic system.
Guidelines and responsibilities for system installers.
Terms and conditions for maintaining product warranty.
Information regarding the shipment and handling of the system.
Critical safety recommendations for operation and maintenance.
Overview of the Xmind®dc radiographic system and its features.
Detailed list and description of the Xmind®dc system's parts.
Technical drawings showing the system's physical dimensions.
Explanation of labels and identification markings on the system.
Environmental, wall, and electrical system requirements for installation.
Step-by-step guide for installing the Xmind®dc system.
Instructions for safely unpacking and checking system components.
Detailed steps for mounting the wall plate.
Instructions for assembling the system's support bracket.
Steps for assembling the adjustable pantograph arm.
Procedure for mounting the control timer unit.
Steps for attaching and securing the X-ray tubehead.
Adjusting the pantograph arm for proper balance and movement.
Detailed instructions for connecting the system's power supply.
Default configuration settings and parameters.
How to modify system settings using dip-switches.
Steps for powering on and verifying the system's initial functions.
Procedures to check correct installation and configuration.
Verifying radiographic voltage, current, and exposure times.
How to set and view functional parameters for diagnostics.
Steps for calibrating the X-ray tubehead for accurate operation.
List of system error codes, causes, and solutions.
Recommended routine inspections and lubrication for the system.
Instructions for cleaning and disinfecting the system's exterior.
Steps for safely replacing fuses in the timer unit.
Instructions for sending defective parts for repair.
Guidelines for environmentally responsible disposal of the system.
Catalog of available replacement parts for the system.
Detailed technical data and parameters of the X-ray source.
Environmental conditions for operation, transport, and storage.
List of applicable international standards and directives.
Radiation exposure values (DAP) for different settings.
Guidelines for EMC emissions and immunity.
Diagrams and measurements for wall and mobile installations.
Wiring diagram for system electrical connections.
General| Frequency | 50/60 Hz |
|---|---|
| Tube Current | 7 mA |
| Focal Spot | 0.8 mm |
| Focal Spot Size | 0.8 mm |
| Type | Dental X-ray System |
| Power Supply | 110-240 VAC, 50/60 Hz |
| Filtration | 2.5mm Al equivalent |
| Exposure Time | 0.02 to 3.2 s |
| Generator Voltage | 60-70 kV |
| X-Ray Field | 60 mm diameter at 20 cm |
| Sensor Type | Digital Sensor |
| Voltage Range | 60 to 70 kV |
| Compatibility | Digital sensors and film |
To Next Page