Acteon SOPIX Series - Precautions for Use; Safety Instructions

ENGLISH
SOPIX SERIES • User’s manual
4
2.2. PARTS LIST
The SOPIX or SOPIX² dental digital X-ray system is composed of the following elements:
• A sensor, size 1, linked to its controller via a cable of 3.70 meters total length
or
• A sensor, size 2, linked to its controller via a cable of 3.70 meters total length
• A sensor holder.
The SOPIX inside or SOPIX² inside dental digital X-ray system is composed of the following elements:
• A sensor, size 1, linked to its controller via a cable of 0.70 meter in length.
• A sensor, size 2, linked to its controller via a cable of 0.70 meter in length.
• A sensor holder ready-positioned on the controller.
• An installation manual.
• A 5 meter USB active repeater cable.
All the digital X-ray systems in the SOPIX series combine the following elements:
• A batch of 10 sensor sleeves.
• A CD-ROM of SOPRO Imaging software.
• Multilingual user’s manual incorporated into the Sopro-Imaging software CD-ROM.
• A quick startup guide.
• A poster presenting sensor precautions for use.
• Optional: the positioning kit.
The SOPIX series systems are packaged in a custom carton. This carton should be kept for future possible transportation. For more
details about these products, please refer to our catalogue or contact our commercial service.
NOTE :
The SOPIX series systems and their accessories have been designed to maximize performance and safety. The use of different origin
accessories may reduce the performance and safety of these devices. Only use SOPRO accessories and authorized SOPRO after-sales
services.