Acteon SOPIX Series - Precautions for the USB Port; Electromagnetic Interference; Electrostatic Interference

ENGLISH
SOPIX SERIES • User’s manual
6
3.2. SYSTEM OPERATING ENVIRONMENT
Refer to section 10 “Technical features”.
3.3. TRANSPORT AND/OR STORAGE ENVIRONMENT OF THE SYSTEM
Refer to section 10 “Technical features”.
3.4. PRECAUTIONS FOR THE SENSOR(S)
It is imperative to take some precautions for use of the sensors, particularly:
!
CAUTION:
• YOU MUST handle the sensor with great care.
• YOU MUST use a positioning kit to correctly place the sensor.
• YOU MUST use a disinfectant wipe to clean the sensor.
• YOU MUST put the sensor on its support.
• DO NOT ask the patient to bite the sensor or the connecting cable.
• DO NOT immerse the sensor.
• DO NOT open the sensor or controller in case of failure.
• DO NOT use protections other than the SOPRO sensor sleeves.
WARNING:
• YOU MUST use a SOPRO sensor sleeve for each patient.
• DO NOT put the sensor in an autoclave.
• DO NOT drop the sensor.
• DO NOT hold the sensor with clamp forceps.
• DO NOT hold the sensor by the connecting cable.
• DO NOT roll over or walk on the connecting cable.
• DO NOT use abrasive product to clean the sensor.