Quick Installation Guide 5
4
CONNECT THE DEVICE
The example below displays a network with the Video Decoder and basic
required peripherals to start using the device.
Default IP Address
10.0.0.10
5
LOGIN
USB Devices
HDMI Monitor
Power Source
Network Switch
10.0.0.10310.0.0.100 10.0.0.101 10.0.0.102
Network Cameras
DEVICE
Account: admin
Password: 123456
“123456” is the default password of the
administrator’s user account. For security
reasons, please remember to change it.
1. Connect the device to a power source. Once connected, the device
automatically turns on.
2. On the Login screen, using the on-screen keyboard, type the Account and
Password.
Done
Numeric Keypad
To Next Page
Loading...