14
STEP 7. Changing parameters during
a treatment
You can easily change treatment parameters
in the middle of a treatment.
1. Pressing and TIMER keys together
during treatment enters the Therapy Mode
menu.
2. Change settings as described on page 10.
3. To cancel your actions press and TIMER
together.
4. To save your settings and exit Therapy
Mode menu press and hold the TIMER
button. This will cancel the current treatment
and reset the treatment timer.
Press or to increase or decrease the
intensity during treatment.
1. Press TIMER .
2. Pressing or will then increase or
decrease treatment timer from its current
value.
3. To confirm new time press TIMER again.
Once your change has been confirmed
Acticare IC will return to the running state
with the timer counting down and the
intensity you originally set.
Changing treatment programs during
treatment:
Changing the intensity during
treatment:
Increasing or decreasing the timer
during treatment
5
Interferential Mode
STEP 8. Ending a treatment session
Treatment has ended when the timer has
finished counting down and the message
“TREATMENT COMPLETE” is displayed.
You can end a treatment before the timer has
finished by turning off the main unit.
To turn off the main unit hold down the
ON/OFF button for 1 second.
To Next Page
Loading...