32
Settings Menu
Press and TIMER together when
prompted to “PRESS + TO BEGIN
TREATMENT” directly after switching on
Acticare IC. The display flashes “SETT MENU”
for one second.
Press the TIMER
button to advance through the options until
–
To make changes:
Press + or to set the value of the
parameter to your desired setting.
Press and hold the TIMER button for 1
second.
Press the
and TIMER buttons together.
–
–
To exit Settings and save your changes:
To exit Settings without saving:
To enter the Settings menu:
The following parameters can be changed in the Settings Menu:
Parameter Screen Valid Description
Name Options
Pad Detect PAD ON, OFF Disables detection of disconnection of leads and
pads. This is useful for patients with hairy skin
who experience false disconnect messages.
Disabled in IC modes.
Year YEAR 2004 - 2034 Sets year.
Date DATE 1 - 31 Sets day of month.
Minute MIN 0 - 59 Sets current time (minutes).
Serial port COM ON, OFF For clinician use. Controls serial
communications port.
Language L English, French, Allows selection of language for help messages.
German
Clock CLK ON, OFF Controls time and date display when the
device is switched off.
Month MONTH Jan - Dec Sets month.
Hour HOUR 0 - 23 Sets current time (hours).
Pain diary DIARY ON, OFF For clinician use. Allows level of relief to be
recorded using Visual Analogue Scale (VAS)
scoring which can be uploaded for analysis.
Consult www.acticare.com for details.
Buzzer BUZ ON, OFF Controls buzzer, disables end of treatment
alarm.
11
To Next Page
Loading...